Rendering
Render finishes and repainting for rendered walls, inside and out.
Services
Every surface, inside and out.
Eight painting services, one standard of preparation. Every job is quoted in writing after a proper look.
Weatherboard Painting
Prep and repainting for weatherboard homes, done board by board.
Roof Painting
Cleaning, repairs and membrane coating for tile and metal roofs.
Spray Painting
Airless spray finishes for walls, ceilings, roofs and exteriors.
Cladding Painting
Repainting for fibre cement, aluminium and composite cladding.
Paint Removal
Stripping failed paint back to a sound surface before repainting.
Pressure Washing
High-pressure cleaning for driveways, paths, walls and roofs.
Brick Wall Painting
Painting interior and exterior brick walls, properly sealed first.
In Detail
Inclusions,Not Guesswork.
Every service comes with a clear list of what is included, so there are no surprises once the work starts.
SERVICE 01
Rendering
A good render finish starts with the wall underneath. We check the surface for cracks, hollow spots and old flaking coating, patch and repair what needs it, then apply the render or texture coat to an even, consistent finish. Once cured, the wall is sealed and top-coated with exterior-grade membrane paint. For homes that already have render, we handle the repaint side: pressure clean, crack repairs, primer and two top coats. The result is a flat, modern finish that lifts the whole front of the house, which is why rendering jobs are so often booked before a sale or after a renovation. Every rendering job is walked through with you before we start, so the texture, the colour and the edges around windows and doors are agreed before a bag is opened.
- Surface inspection and crack repairs
- Render or texture coat application
- Primer and two top coats of exterior paint
- Clean edges around windows, doors and trims
- Full site clean-up on completion
SERVICE 02
Weatherboard Painting
Weatherboards show every shortcut, because the sun hits each board edge and any peeling or bare timber telegraphs straight through the top coat. We prepare weatherboard homes properly: scrape back loose paint, sand the edges flat, fill nail holes and gaps, spot-prime bare timber, then apply two full top coats. Geelong, Queenscliff, Portarlington and the Surf Coast have streets of older weatherboard homes, and coastal air is hard on them. We use exterior paints suited to local conditions and pay attention to the boards that cop the weather, not just the ones you see from the street. Rotten or split boards are pointed out at quote stage so you can decide whether to replace them before painting, rather than finding out after.
- Scrape and sand of loose and flaking paint
- Gap and nail hole filling
- Spot priming of bare timber
- Two top coats of exterior paint
- Board condition report at quote stage
SERVICE 03
Roof Painting
A roof coating is only as good as the clean underneath it. We pressure clean the whole roof first, strip back moss and lichen, repoint or re-bed ridge caps where needed on tiled roofs, then apply primer and two coats of roof membrane in your chosen colour. On metal roofs we treat any surface rust before priming. On tile roofs we replace broken tiles as we go so the finished roof is sound as well as sharp. Roof painting is one of the highest-impact jobs on an older home: from the street it reads as a new roof, at a fraction of replacement cost. It also seals the surface and sheds water the way the roof did when it was new.
- Full roof pressure clean
- Moss and lichen treatment
- Ridge cap repointing where required
- Rust treatment on metal roofs
- Primer plus two coats of roof membrane
SERVICE 04
Spray Painting
Spray application lays paint down faster and more evenly than a brush and roller, with no lap marks or roller texture. It suits big open areas: new builds, extensions, garage interiors, rendered walls, roofs and whole-house repaints. The finish depends on the masking. We cover and tape everything that is not being painted: floors, windows, fittings, benchtops and gardens, then spray in controlled passes for a consistent film. Edges and corners are cut in so the lines stay crisp. Our job photos show the process honestly: drop sheets down, plastic over the floors, tape on every edge, then the spray rig. That preparation is most of the job, and it is why the finish photographs the way it does.
- Full masking and protection of floors, windows and fittings
- Airless spray application
- Cut-in edges and corners
- Two coats as standard
- Overspray check and clean-up
SERVICE 05
Cladding Painting
Modern cladding systems take paint well when they are prepared for their material. Fibre cement needs a thorough clean and the right primer; aluminium and composite panels need degreasing and an adhesion primer so the top coat grips. We clean, prepare and spray or roll cladding to a factory-look finish, including the joints, flashings and trims. Faded or chalky panels come back to a solid, even colour that holds up in sun and coastal air. If any panels are damaged rather than just faded, we flag them at the quote so you can decide on replacement first.
- Wash and degrease of all panels
- Adhesion primer suited to the cladding type
- Spray or roll application of two top coats
- Joints, flashings and trims included
SERVICE 06
Paint Removal
Painting over peeling, bubbling or chalking paint wastes good paint: the new coat only holds as well as the layer under it. Paint removal takes the surface back to sound material so the repaint actually lasts. Depending on the surface we scrape, sand, or use chemical strippers and heat where appropriate, then feather the edges and prepare the stripped area for primer. On older homes we take care around detailed timber and heritage profiles. Paint removal is usually quoted as part of a repaint, so the price you get covers the whole job from strip-back to final coat.
- Scrape and sand of failed paint
- Chemical stripping where the surface needs it
- Feathered edges ready for primer
- Disposal of stripped paint debris
SERVICE 07
Pressure Washing
Pressure washing strips away the grime, moss, mould and salt film that builds up on outdoor surfaces. Driveways, paths, patios, fences, rendered walls and roofs all come up several shades brighter, and it is the essential first step before any exterior painting. We adjust pressure and nozzles to the surface: firm enough to clean concrete properly, gentle enough not to strip soft timber or damage render. Runoff is managed so gardens and stormwater are not flooded with debris. Book it on its own to freshen the place up, or as the first stage of a painting job.
- Driveways, paths and patios
- Exterior walls and fences
- Roof cleaning before coating
- Pressure matched to each surface
SERVICE 08
Brick Wall Painting
Bare brick is porous, so painting it starts with sealing. We clean the wall, let it dry, apply a masonry sealer or primer, then finish with two coats of masonry paint brushed, rolled or sprayed into the mortar joints. Exterior brick takes a breathable exterior coating so moisture does not get trapped behind the paint film. Interior feature brick gets a finish matched to the room, from flat to low sheen. Painting brick is usually a one-way decision, so we talk through the look and the maintenance at the quote before any sealer goes on.
- Brick cleaning and preparation
- Masonry sealer or primer
- Two coats of masonry paint
- Mortar joints fully covered
Client Feedback
Rated ByLocal Clients.
Genuine reviews from property owners across our service areas.
Google
"We recently renovated our home and were looking for a reliable, quality house painter. We put our trust into Zabi and he did not disappoint at all. The paint on our walls is flawless, the workmanship is top notch and I highly recommend him!"
Google
"We recently renovated our property and required the second storey of our house repainted, as well as our stairs and balustrades. Having dealt with numerous painters during this renovation, we have to acknoweldge that Zabi's workmanship was second to none. Great character and great attention to detail. Highly reccomend him!"
Direct
"Zabi repainted our whole weatherboard exterior and the prep was what impressed me most. Every board was scraped and sanded properly before any paint went on. The house looks new again and the edges around the windows are spotless."
Direct
"Roof came up really well. Cleaning and two membrane coats over three days. The start got pushed a day because of rain, which was annoying, but Zabi kept me posted and the finish is even. Would use again."
Direct
"We had cracks in the render patched and the whole front re-coated. You cannot tell where the repairs were, which was exactly what we hoped for. Clear written quote, no extras at the end."
Direct
"Painted the bare brick on our place and talked us through the decision properly before starting, including that it is basically permanent. Sealed first, then two coats into every mortar joint. It has completely changed the front of the house."
Direct
"Garage interior and the new extension sprayed. The masking was next level, plastic and tape everywhere, and the finish has no roller marks at all. Quick job too."
Direct
"Booked a pressure wash of the driveway, paths and back patio before we listed the house. Years of grime gone in a morning. The real estate agent thought we had re-laid the driveway."
Direct
"Old flaky paint stripped back on the front verandah and repainted. Messy job, handled well, and it took a day longer than first estimated because of how bad the old layers were. End result is worth it."
Direct
"Sprayed the interior of our new build before we moved in. Ceilings and walls done in days with a finish we could not have got with a roller. Everything was covered and taped, no overspray anywhere."
Direct
"Our cottage cops the salt air and the old paint was chalking badly. Zabi explained what the coast does to coatings and used an exterior system suited to it. Boards were washed, sanded, spot primed and two top coats. Very happy."
Common Questions
Before YouGet a Quote.
Answers to the questions that come up most before a job is booked.
Every home is different, so we quote each job after looking at it. The price depends on the size of the area, the condition of the surface, how much preparation is needed and the access. The quote you get is in writing and covers the whole job, so there are no surprises at the end.
Get Started
Not Sure Which Service You Need?
Call us or send a quick enquiry and we will point you in the right direction.